Specifically designed for versatility, the BPS 3648M is a turn-key system able to provide back-up power, grid-interactive power or off grid power for residential homes or small business use.
In the event of a power failure, the system will detect and instantly power critical loads using its 3600 watts continuous power output rating and eight maintenance-free AGM batteries. Extending backup run time is possible by adding batteries or connecting to a fossil-fuel generator (off grid or strictly backup versions only)
The BPS 3648M can integrate renewable energy sources (Solar, Wind, and Hydro) both to recharge itself to extend backup run time and to tie to the utility grid for net metering. Until utility power is restored the system acts as a surge protector between utility power and appliances and does not allow back-feeding to the utility power grid.
The BPS 3648 is also ideal for off-grid applications by combining the output power, backup battery bank and renewable recharging options.
Common Applications:
Security systems, furnace fans, refrigeration, computers, sump pumps, phone systems, or anything that runs on 120 or 240 Volts.
Automatic power loss detection, instant backup power
Lockable, coated metal UL-Rated enclosure (indoor use)
Pure Sine power, safe for sensitive electronics and computers
Net Metering (sellback) capable
Backup power up to 48 hours*
Ultra-quiet operation
Hardwire installation into existing electrical system
Compatible with solar, wind, and hydro power systems
Compatible with generators for battery charging (off grid or strictly backup versions only)
Compact design, installed inside home or business
2 year limited warranty. Made in U.S.A.
3600 Watts continuous
6000 Watts surge
30 Amps @ 120VAC
8 – high capacity maintenance free batteries
48 VDC battery input
55″L x 34″W x 15.24″D
Weighs 965 lbs with pallet
All renewable energy options and generators are available from Backup Power Source. Standby generators require installation involving permanent outdoor placement, electrical wiring and fuel source connections. A licensed electrician is required to install and wire all BPS systems and a trained professional is recommended for final connections of gas and electric.
* Every installation is unique. Backup time varies according to battery size, number of batteries, and power draw. Picture may vary from actual installation.
